Home > Products > Bulk Container Agitators

Bulk Container Agitators

Use the right tool for the job! Cleveland Eastern Mixers offers a line of pre-engineered mixers for bulk drum mixing when standard portable mixers are not adequate for viscous, solid suspension or special blending applications.

Heavy-duty mounting bridges are designed to fit each manufacturer's drum frame, whether it's wire cage, steel or plastic. The bridges are fitted with lock down clamps, lifting handles, and splash-guard tank seals.

Models are offered for direct drive applications with horsepower of ½ to 2 HP, utilizing chemical duty, TEFC, EXP motors or air motors.

Buy with confidence. Only EMI warrants its bulk container mixers for 3 years.

Specifications

Standard Bulk Drum Models

  • Specify single or three phase motor: 115/230/60/1 or 230/460/60/3 TEFC, 1.15 Service Factor
  • Air Motor: Variable Speed 600-2000 RPM
  • Powder Coated finish
  • All 316 Stainless Steel wetted components
ELECTRIC MODELS
Output speed 1750 RPM
Model# BCE-½ BCE-1 BCE-2
Horsepower ½ 1 2
Max Shaft Length 32" 32" 35"
Prop Size 5" 6" (2) 6"
Weight 35 lbs. 50 lbs. 60 lbs.
Pumping Capacity in water 510 GPM 680 GPM 1360 GPM
Price* $ $ $
AIR DRIVEN MODELS
Output speed variable 600-2000 RPM
Model# BCA-½ BCA-1 BCA-2
Horsepower ½ 1 2
Max Shaft Length 32" 32" 35"
Prop Size 5" 6" (2) 6"
Air Pressure 40 psig 80 psig 80 psig
Cubic Feet/Minute 20 40 70
Weight 25 lbs. 30 lbs. 45 lbs.
Pumping Capacity in water 510 GPM 680 GPM 1360 GPM
Price* $ $ $

* price does not include shipping & handling charges, plus tax where applicable

Options

  • Optional Output Speed with gear drive: 350 RPM
  • PVC, Rubber and other coatings available
  • 10' Line cord with switch for single-phase motors
  • Explosion proof, Chemical duty, Washdown, 50 HZ, 100 to 575 Volt or 1425 RPM motors available
  • Air lubrication set including filter, regulator and lubricator recommended for air driven models

Engineered Bulk Drum Mixers for Specialty Applications

For viscous or heavier materials, gear-driven models ranging from ½ to 3HP are available with speeds from 45rpm to 350 rpm. Low headroom, right-angle drives are used to allow for stacking and operating well below OSHA dB noise specifications.

Three impeller designs are available. Single, dual and triple impellers can be used. A unique four bladed collapsible axial flow impeller fits through a 5¾" opening and can open to 18". This provides exceptional blending for viscous materials or suspending fine solids without "dead spots" often created by mixing with small propellers.

Call us at 1-800-243-1188 or e-mail us today with your application's requirements or for more information on bulk container mixers and agitators.

Back To Top